null

HOLLEY

Holley 15/20 Gallon Fuel Gauge Sender 9" 0-90 OHM 19-228

PART NUMBER:
19-228
MPN:
19-228
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
Sending Unit
Material:
Steel
Fuel Type:
Gas
Fuel Sending Unit Ohms:
0-90
Mounting Hardware Included:
Yes
  • Holley 15/20 Gallon Fuel Gauge Sender 9" 0-90 OHM 19-228
  • Holley 15/20 Gallon Fuel Gauge Sender 9" 0-90 OHM 19-228
  • Holley 15/20 Gallon Fuel Gauge Sender 9" 0-90 OHM 19-228
  • Holley 15/20 Gallon Fuel Gauge Sender 9" 0-90 OHM 19-228
$68.26

Description

Holley 15/20 Gallon Fuel Gauge Sender 9" 0-90 OHM 19-228

Holley Aluminum fuel cells come in a several variations for nearly every race application. They are offered in both flat bottom and rear sump variations to prevent fuel starvation under heavy acceleration. These fuel cells feature -10AN ORB fittings on the feed, return and vent ports, for high flow support and easy plumbing. They are made from 2.5mm thick 5052 TIG welded aluminum, with triangulated mounting tabs for added support and long-term reliability. The Holley aluminum fuel cells contain anti-slosh foam that is pre-cut to accept Holley fuel level senders. This foam is not E-85 compliant and should be removed if that fuel type is used. Compatible with the single and dual in-tank fuel pump modules.

Features:

  • 0-90 Ohms (empty-full) works with most aftermarket gauges
  • Standard SAE 5-bolt mounting pattern
  • Tube design acts a damper for consistent readings
  • Save space and eliminate need for a float arm
  • Comes with gasket and mounting hardware, E85 compatible
  • 8-inch depth (PN: 19-227) for 5 & 10-gallon fuel cells
  • 9-inch depth (PN: 19-228) for 15 & 20-gallon fuel cells

 

View AllClose

Warranty Information

All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty. In the event of an alleged defect in material or workmanship, Holley Performance Products’ responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Holley Performance Products. To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance Products. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements. HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND – NEW PRODUCT Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose