Cylinder Heads

Goodson Cylinder Head Resurfacing Segment Aluminum Oxide GS-PBS-3 Use the GS-PBS-3 Aluminum-Oxide Abrasive Segments to resurface Steel and Hardened Metal heads on your Peterson/Peterson Berco, Winona Van Norman and Storm Vulcan Cylinder Head Resurfacing...

Goodson Cylinder Head Resurfacing Belt 40 Grit Zirconia-Alumina w/ Grind Aid A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use...

Goodson Cylinder Head Resurfacing Belt 40 Grit Zirconia-Alumina A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson Cylinder Head Resurfacing Belt 80 Grit Silicon Carbide A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson Cylinder Head Resurfacing Belt 60 Grit Silicon Carbide A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson Cylinder Head Resurfacing Belt 40 Grit Silicon Carbide A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson CBN Cutter Insert 3/8" Dia. x 1/8" Uncoated Single Sided CBNS-38 Gives a finer RMS surface finish Always cut using the dull finished side Single-Sided For Cast Iron

Goodson CBN Cutter Insert 3/8" Dia. x 1/8" Titanium Nitride Coated Single Sided CBN-375S Titanium Nitride coated for long life Gives a finer RMS surface finish Always cut using the dull finished side Single-Sided For Cast Iron

Goodson CBN Cutter Insert 3/8" Dia. x 1/8" Titanium Nitride Coated Double Sided CBN-375D Titanium Nitride coated for long life Gives a finer RMS surface finish Always cut using the dull finished side Double-Sided For Cast Iron

Goodson PCD Insert for Aluminum 3/8" Dia. x 1/8" Thick PCDS-375 A must for shops committed to meeting today's strict surface finish requirements Fits all machines with 3/8" and 1/2" type CBN bit holders. Always cut using the dull finished side

Goodson 24 Grit Resurfacer Wheel 16"x 3"x 1.5" Serrated Plate GS-545BL This Single-Piece Resurfacer Wheel fits Kwik-Way 545BL, 860A, L & T Resurfacers. Specifications: 24 Grit, 16" Diameter x 3" H x 1-1/2" Face Width. Serrated Plate. Banding...

Goodson 24 Grit Resurfacer Wheel 14"x 3"x 1.5" Serrated Plate GS-545B 24 Grit Cylinder Head Resurfacing Wheel for Kwik-Way 545B, 856, 855-5 and 860 Grinders.