Cylinder Heads

Goodson Cylinder Head Resurfacing Segment Silicon-Carbide GS-SVS-2 Use the GS-SVS-2 Aluminum-Oxide/Silicon-Carbide Abrasive Segments to resurface Aluminum, Cast Iron, Hardened Iron and Steel on your Peterson/Peterson Berco or Storm Vulcan...

Goodson Cylinder Head Resurfacing Segment Aluminum Oxide GS-KWS Use the GS-KWS Aluminum-Oxide Abrasive Segments to resurface Aluminum or Cast Iron heads on your Kwik-Way 858 or 962 Cylinder Head Resurfacing Machines. 2.56" Wide 0.79"...

Goodson Cylinder Head Resurfacing Segment Aluminum Oxide GS-PBS-3 Use the GS-PBS-3 Aluminum-Oxide Abrasive Segments to resurface Steel and Hardened Metal heads on your Peterson/Peterson Berco, Winona Van Norman and Storm Vulcan Cylinder Head Resurfacing...

Goodson Cylinder Head Resurfacing Belt 40 Grit Zirconia-Alumina w/ Grind Aid A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use...

Goodson Cylinder Head Resurfacing Belt 40 Grit Zirconia-Alumina A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson Cylinder Head Resurfacing Belt 80 Grit Silicon Carbide A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson Cylinder Head Resurfacing Belt 60 Grit Silicon Carbide A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson Cylinder Head Resurfacing Belt 40 Grit Silicon Carbide A belt has three important part: abrasive, bond and backing. Goodson belts are made for top performance and long life. Our belts also feature a unique splice that permits use in both...

Goodson CBN Cutter Insert 3/8" Dia. x 1/8" Uncoated Single Sided CBNS-38 Gives a finer RMS surface finish Always cut using the dull finished side Single-Sided For Cast Iron

Goodson CBN Cutter Insert 3/8" Dia. x 1/8" Titanium Nitride Coated Single Sided CBN-375S Titanium Nitride coated for long life Gives a finer RMS surface finish Always cut using the dull finished side Single-Sided For Cast Iron

Goodson CBN Cutter Insert 3/8" Dia. x 1/8" Titanium Nitride Coated Double Sided CBN-375D Titanium Nitride coated for long life Gives a finer RMS surface finish Always cut using the dull finished side Double-Sided For Cast Iron

Goodson PCD Insert for Aluminum 3/8" Dia. x 1/8" Thick PCDS-375 A must for shops committed to meeting today's strict surface finish requirements Fits all machines with 3/8" and 1/2" type CBN bit holders. Always cut using the dull finished side