Tools

Goodson 240 Grit Standard Aluminum Oxide Flex-Hones Flex-Hones from 2-1/4" to 3" are 8" OAL Flex-Hones 3-1/4" to 4-5/8" are 13 1/2" OAL Aluminum Oxide Abrasive  

Goodson OE Catspaw Screw  These OE Catspaw Screws fit Winona Van Norman, Peterson or Kansas Instruments models 777S, PK-477S and 944S. Three sizes to choose from. 800-114 Catspaw Screw fits #1 shoe (0.625" long) 800-115 Catspaw Screw...

Goodson Solid Viton Seals w/ Metal Jacket/Choker Spring - Pack of 16 High operating temperature. KPMI® red Viton® seals operate at a higher temperature than other seal materials.Chemical resistance. Viton® seals are resistant to petroleum...

Goodson OE Style Seals | Solid Viton w/ Metal Jacket - 16 Pack High operating temperature. KPMI® red Viton® seals operate at a higher temperature than other seal materials.Chemical resistance. Viton® seals are resistant to petroleum products...

Goodson Premium Tapered Reamers TR-216-1 Use by hand or with a powered driver to deburr or enlarge tapered holes for valve guides, bolt hole chamfering and more Use in a 1/2" chuck at approximately 40 RPM OAL: 5-3/5" Flute Length: 3-3/4" Small...

Goodson Torque-Angle Indicator TQR-4554 When torque is given as degrees of turn past a certain ft/lb, use this gauge to show degrees Hold metal base with one hand Plastic dial will turn as you tighten Fits between a socket-driven extension and the...

Goodson Left Facing Brake Lathe Tip Holder Kwik-Way/Snap-On TKW-85L For Kwik-Way & Snap-On 3/8" x 3/8" x 2-1/2" long Use RT-KW series positive rake tips Replace OE numbers 109-1091-00 and 109-1091-02 Available in left or...

Goodson Right Facing Brake Lathe Tip Holder Kwik-Way/Snap-On TKW-84R For Kwik-Way & Snap-On 3/8" x 3/8" x 2-1/2" long Use RT-KW series positive rake tips Replace OE numbers 109-1091-00 and 109-1091-02 Available in left or...

Goodson Left Hand Brake Lathe Tip Holder AMMCO 7000 TAM-702 Measure: 3/8" x 3/8" x1-7/8" Fit the following: Ammco 3000, 3850, 4000, 4100, 7000, 6900 and 6950 Twin Cutters All-Tool 747 Hoffman 660 Performance 6600, 7200, 7100,...

Goodson Right Hand Brake Lathe Tip Holder AMMCO 7000 TAM-701 Measure: 3/8" x 3/8" x1-7/8" Fit the following: Ammco 3000, 3850, 4000, 4100, 7000, 6900 and 6950 Twin Cutters All-Tool 747 Hoffman 660 Performance 6600, 7200, 7100,...

Goodson Right Hand Brake Tip Holder for AMMCO Drums TAM-41R Fits the following: Ammco 1000, 2002, 3000, 4000, 4100, 7700 All-Tool 747 Hoffman 660 Performance 6600, 7200, 7100, 7600 Use with RT-A Series negative rake tips Replaces OE No...

Goodson Wrist Pin Press Base TB-Base The TB-BASE Wrist Pin Press Base is a 5 part set that includes a Small Press Tube, Large Press Tube, Wrist Pin Ring, Wrist Pin Parallels and an Extended Mandrel. Together, these for the base for the Universal...