Tools

Goodson Double Parts Washing Basket PWB-25 This large parts basket measures 8.75" OD x 8.5"H . The two halves are hinged together on one side and the other is held together by a parts basket clip.

Goodson 2-1/4" Dia. Basket w/ Attached Lid PWB-2 This is the smallest parts basket Goodson offers. It is 2-1/4" in diameter and stands 7" tall. The lid is permanently attached to the wire mesh. Ideal for small parts. Not for use with acidic or...

Goodson Lid and Clip For PWB-10 Add the lid and clip to your single parts basket to keep parts from falling out in the jet spray or hot tank. Just like the baskets, these parts are made of 1/4" galvanized, welded mesh and will withstand most...

Goodson Single Parts Basket with Handle PWB-10 Light, sturdy basket holds small parts for cleaning, sorting and storage Galvanized welded 1/4in mesh basket withstands most solvents Basket measures: 8.75" OD and stands 8.5" H

Goodson Parts Tumbler Solution 1 Gallon PT-SOL Goodson Parts Tumbler Solution is specially formulated for use in a Parts Tumbler. Mix at 30 parts water to 1 part PT-SOL. For best results, dry cleaned parts with compressed air. 1 Gallon.

Goodson 20 lb. Parts Tumbler Steel Diagonals PTM-20D Goodson's Steel Diagonals for Parts Tumblers are ideal for cleaning valves. They measure 5/16" dia. X 5/16" long. 20 pounds.

Goodson Jet Valve Eliminator Kit JVE-26 Kit lets you use a jet valve head in place of one without. Threaded plugs replace the entire valve bodies. Easier than welding the holes to plug them. 4 per package.

Goodson Jet Washer Parts Basket JWB-6 This triangle-shaped basket is designed to sit side-by-side on the Jet Wash table allowing you to fit more baskets in the machine to clean faster. Measures 10-3/4" tall x 11-3/8" across x 10-1/2" deep. Six...

Goodson 20 lb. Parts Tumbler Ceramic Diagonals PTM-20CR Use these Ceramic Diagonals in your parts tumbler for soft materials such as brass and aluminum. Diagonals measure 5/16" dia. X 5/8" long. 20 pounds.

Goodson Parts Tumbler Basket PT-BASKET Fits Goodson, KI, Axe, RMC & Peterson Parts Tumblers Measures 8" x 12" x 12"

Goodson Universal Threaded Stud Extractor Replacement Parts Choose from these replacement parts for the Goodson Universal Threaded Stud Extractor.

Goodson Universal Stud Extractor PSR-375 Compact design. Use with your pneumatic impact tools & sockets (15/16" socket removes, 1-7/16" socket installs) Requires only 3/4" clearance to adjust studs. For threaded studs only. Hardened 3-Jaw clamping...