Tools

Goodson Pneumatic Valve Seat Drivers  Install seats faster, easier and without galling Driver Heads sold separately 2 sizes to choose from

Goodson Intake Port-Reshaping Kit PRK-99 Withstands up to 500 degrees! Modify ports for hi-performance by adding material in the right places. Superior formula uses 2-part epoxy that won't shrink when dry. Mix ratio is 1:1 by weight. Mix and...

Goodson Manual Ring Filer Diamond Abrasive Wheel PRF-870-DW This Diamond Abrasive Wheel for Manual Ring Grinders measures 2"OD x 1/4"ID x 1/16" thick. It will fit both the obsolete PRF-870 and the PRF-500 Manual Ring Grinders.

Goodson Manual Piston Ring Filer PRF-500 Use this Manual Ring Grinder to prevent damage to rings and cylinders by producing proper end gap quickly and easily. The universal design allows you to grind virtually any make, type or size of...

Goodson Replacement Abrasive Wheel PRF-250W Always keep an extra abrasive wheel on hand. Measures 2-1/2" OD x 7/16" ID x 1/8" Thick. 120 Grit Silicon-Carbide.

Goodson Manual Piston Ring Filer PRF-250 Produce valve stem clearance and end gap rings squarely with one tool. 120 grit silicon carbide wheel holds shape and produces clean, precise cuts. Built-in V-Groove for butt grinding valves.

Goodson Adjustable Piston Ring Expander | PRE-500 This simple tool allows you to remove and install most rings. The tapered jaws will handle 3/64" to 1/4" ring widths.

Goodson Pushrod Cleaning Brush PRB-80 Clean the inside diameter of your pushrods with this brush. Will fit pushrods as small as 0.080" ID. 12" long overall. NOTE: It's important to clean the insides of your pushrods when rebuilding an engine. If...

Goodson Oil Gallery Plug Removal Kit PPS-KIT Use this Plug Remover Kit to power oil gallery plugs out with your impact wrench. The threaded plug inside prevents the bit from backing into the holder. The 1/2" drive fits most impact wrenches and the...

Goodson Oil Gallery Plug Removal Tool Bits These replacement bits for the Oil Gallery Plug Remover Tooling are available in 4 sizes. You don't need a separate bit for the 9/32" (PPS-281). Bits can be reground or replaced.

Goodson Oil Gallery Plug Removal Sockets 1/2" drive fits most impact wrenches Hardened tool steel Replacement bits available (sold separately)

Goodson Piston Pin Removal Fixture Kit PPE-7082 Prevents distortion or damage to the piston. Use this fixture to remove or install interference fit piston pins. Force of removal is against piston pin and connecting rod, so no pressure is exerted on...