Tools

Goodson Crankshaft Grinding Coolant 1 Gallon CGC-10 GOODSON Crankshaft Grinding Coolant is formulated specifically for the crank grinding process. This semi-synthetic coolant doesn't contain nitrates and boasts a high lubricity. Goodson recommends...

Goodson Camshaft Bore Washing Brushes Bristles clean tunnel housing bores as well as full-annular grooved areas used on some engines Nylon bristles won't damage bores

Goodson Measuring/Inspection Stand for Crankshafts/Cams PMIS-30 Use this Professional Measuring & Inspection Stand from Goodson to measuring and inspect crankshafts or camshafts or to display your finished work to potential customers. Length...

Goodson 180 Grit Extra Long Silicon-Carbide Flex-Hones All sizes are 17-1/28" OAL Silicon-Carbide Abrasive Ideal for all materials including cast iron, bronze, phosphor bronze and aluminum 180 Grit

Goodson Irontite Ceramic Motor Seal 16 oz. CRS-16 Permanently seals leaking head gaskets, cracked heads and blocks (aluminum and cast iron) Coats the engine to inhibit rust formation and salt water corrosion during normal operation Seals porous...

Goodson Irontite All Weather Seal 16 oz. AWS-16 Seals intakes and head gasket leaks Seals cracks in cylinder heads and engine block Prevents anti-freeze from seeping through gaskets and hoses Lubricates water pump seals Mixes with all antifreeze...

Goodson Seal-Lock Fluid Weld Sealant 8.8 oz. FW-88 Fluid Weld is used for cast iron or aluminum heads and blocks. Use as a sealant for threaded or press-fit parts such as valve guides and seats, threaded crack repair plugs, replacement studs, etc...

Goodson Seal-Lock Fluid Weld Sealant 2 oz. FW-2 Fluid Weld is used for cast iron or aluminum heads and blocks. Use as a sealant for threaded or press-fit parts such as valve guides and seats, threaded crack repair plugs, replacement studs, etc...

Goodson Seal-All Head & Block Sealer 32 oz. CPS-32 Seals pin holes, porosity and small cracks in heads and blocks Polymer fluid penetrates and seals Out-performs ceramics Bonds with existing rust and corrosion to prevent spread Heat at...

Goodson Pressure Tester Rust Inhibitor PRI-10 This clear fluid inhibits rust and does not discolor or cloud the test tank solution. Let's you see better to pressure test. Formula includes biocide and anti-rust additives to extend tank solution life...

Goodson Neoprene Leak Detection Mat LDP-34MAT Commercial-grade Neoprene. Resists petroleum products, abrasion, swelling, sunlight and aging. Use to repair worn mats or make custom leak detection plates. Measures 36" x 48" x 1/8" thick.

Goodson Engine Heat Tab Adhesive Paste HTA-3 Use this premium grade adhesive with any of the Heat Tabs. Formulated to provide proper heat transfer to get an accurate melt if the engine exceeds the melting point of the installed tab. Long term hold...