Tools

Goodson Replacement 1-Edge Sleeve Cutter Bit Rottler 1-3/4"x11/32" RL-1C These 1-Edge Sleeve Cutter Bits fit all Rottler Boring Bars. The bit measures 1-3/4"L with a bit diameter of 11/32".

Goodson Rod Honing Oil RHO-10 Keeps stones clean and free-cutting during rod reconditioning, pin fitting and other honing applications Includes additives for high pressure cutting Will mix with other honing oils

Goodson Rod Clamping Vise RCV-20 Align rods and caps perfectly with our top-quality vise Smooth jaws will not damage connecting rods like an ordinary vise Clamp rods firmly to align parting faces while torquing rod bolts Clamp in a vise or bolt to...

Goodson 80 Grit Roloc Bristle Disc Yellow These 80 Grit, Yellow Bristle Discs are idea for removing foreign materials from aluminum, cast, steel, gasket or flat mating surfaces. Abrasive grains are embedded in plastic bristles that break down in use to...

Goodson 120 Grit Roloc Bristle Disc  2" White RBD-2W Use these 2" diameter 120 Grit Bristle Discs to remove foreign materials from aluminum, cast, steel, gasket or flat mating surfaces. Each disc has abrasive grains embedded in the plastic bristles...

Goodson 50 Grit Roloc Bristle Discs Use these 50 Grit Green Roloc Bristle Discs to remove foreign materials from alumimum, cast, steel, gasket or flat mating surfaces. Abrasive grain is embedded in plastic bristles that break down to expose...

Goodson Heavy Duty Rod Bolt Installation Block RB-50 Mount this universal tempered aluminum block in a vise to support rods while installing bolts. Fits all auto rods, foreign and domestic. If the top wears, you can restore it with a file or belt...

Goodson 5/8" x 4" Right-Hand Brake Drum Cutting Tool R-4 • For Heavy-duty cutting of Cast Iron Hubs on Drum Lathes• Replaces OE Nos. Bear 24034 and Star CB-35• Measures 5/8" square x 4"L

Goodson 3/8" sq. x 2-1/2" Long Right-Hand Brake Drum Cutting Tool R-1 Replaces Bean 43-46R; Bear 20718; Star LB-16; VN 302-7171 for 204, 300,302, 302H, 333, 243V; and Barret & Lempco

Goodson 6" x 7/16" Ultra Duty Wire Wheel QTC-6 This 6" x 7/16" Radial Wire Brush is made with .023" knotted wire for ultra duty applications. On knotted wire brushes, the strands are twisted the full length for best stiffness and fastest cleaning...

Goodson Insulated Parts Washing Gloves Goodson Parts Washing Gloves are available in Large, X-Large and XX-Large. They feature a nitrile exterior with a flock lined interior that won't swell when wet. Gloves measure 13" long and are safe for...

Goodson Flow-Through Parts Brush PWB-FLO-1 Its unique flow-through design makes the Flow-Through Parts Brush ideal for use in a parts washer. The 24" long hose slides over the discharge nozzle in the parts washer, allowing you to direct cleaning...