Tools

Goodson Parts Tumbler Solution 1 Gallon PT-SOL Goodson Parts Tumbler Solution is specially formulated for use in a Parts Tumbler. Mix at 30 parts water to 1 part PT-SOL. For best results, dry cleaned parts with compressed air. 1 Gallon.

Goodson 20 lb. Parts Tumbler Steel Diagonals PTM-20D Goodson's Steel Diagonals for Parts Tumblers are ideal for cleaning valves. They measure 5/16" dia. X 5/16" long. 20 pounds.

Goodson Jet Valve Eliminator Kit JVE-26 Kit lets you use a jet valve head in place of one without. Threaded plugs replace the entire valve bodies. Easier than welding the holes to plug them. 4 per package.

Goodson Jet Washer Parts Basket JWB-6 This triangle-shaped basket is designed to sit side-by-side on the Jet Wash table allowing you to fit more baskets in the machine to clean faster. Measures 10-3/4" tall x 11-3/8" across x 10-1/2" deep. Six...

Goodson 20 lb. Parts Tumbler Ceramic Diagonals PTM-20CR Use these Ceramic Diagonals in your parts tumbler for soft materials such as brass and aluminum. Diagonals measure 5/16" dia. X 5/8" long. 20 pounds.

Goodson Parts Tumbler Basket PT-BASKET Fits Goodson, KI, Axe, RMC & Peterson Parts Tumblers Measures 8" x 12" x 12"

Goodson Universal Threaded Stud Extractor Replacement Parts Choose from these replacement parts for the Goodson Universal Threaded Stud Extractor.

Goodson Universal Stud Extractor PSR-375 Compact design. Use with your pneumatic impact tools & sockets (15/16" socket removes, 1-7/16" socket installs) Requires only 3/4" clearance to adjust studs. For threaded studs only. Hardened 3-Jaw clamping...

Goodson Pneumatic Valve Seat Drivers  Install seats faster, easier and without galling Driver Heads sold separately 2 sizes to choose from

Goodson Intake Port-Reshaping Kit PRK-99 Withstands up to 500 degrees! Modify ports for hi-performance by adding material in the right places. Superior formula uses 2-part epoxy that won't shrink when dry. Mix ratio is 1:1 by weight. Mix and...

Goodson Manual Ring Filer Diamond Abrasive Wheel PRF-870-DW This Diamond Abrasive Wheel for Manual Ring Grinders measures 2"OD x 1/4"ID x 1/16" thick. It will fit both the obsolete PRF-870 and the PRF-500 Manual Ring Grinders.

Goodson Manual Piston Ring Filer PRF-500 Use this Manual Ring Grinder to prevent damage to rings and cylinders by producing proper end gap quickly and easily. The universal design allows you to grind virtually any make, type or size of...