Tools

Goodson Dowel Pin Puller Tightening Sleeve GAO-3 Used as part of the Dowel Pin Puller to remove stubborn dowel pins from blocks, heads, flywheels and more. The tightening sleeve is used to lock the collet to the dowel pin you are pulling. Always...

Goodson 1.2" Long Heavy Metal Tungsten Heavy Metal, also known as Mallory Metal is essential when balancing rods and pistons to crankshafts to ensure proper engine operation. 1.2" Long. Press Fit: = .002" / .05mm.

Goodson 1" Long Heavy Metal Tungsten Heavy Metal, also known as Mallory Metal is essential when balancing rods and pistons to crankshafts to ensure proper engine operation. 1.0" Long. Press Fit: = .002" / .05mm. 

Goodson Flywheel Table Lube 1 Gallon FG-1131-G Extend flywheel grinder life High pressure oil designed to lubricate table bearings and ways For all makes of flywheel grinders 1 Gallon (3.78 mL) jug

Goodson Dial Indicator Spindle Extensions Goodson Dial Indicator Spindle Extensions are available in 3 lengths (1.5", 2.5" and 3.0") and feature 2x48TPI. Each sold separately.

Goodson Flywheel Depth Gauge FGG-12 Measure flywheel before and after grinding to maintain proper depth specifications Gauge assembly includes dial indicator, bar and magnets Spindle extensions sold separately

Goodson Flywheel Grinder Coolant 5 Gallon FG-1102-G For all makes of flywheel grinders Includes synthetic rust inhibitors to prevent rancidity Dilute 30:1 Available in 1 and 5 gallon containers

Goodson Flywheel Grinder Coolant 1 Gallon FG-1101-G For all makes of flywheel grinders Includes synthetic rust inhibitors to prevent rancidity Dilute 30:1 Available in 1 and 5 gallon containers

Goodson E-Z Lock Insert FG-LOCK OD: 5/8"x11, ID: 7/16"x14

Goodson Flywheel Grinder Bolt Adaptor Set | FG-AB-KIT Replace shoulder bolts with standard hardware Low cost adaptor converts any 1/2" or 7/16" bolt to 3/4" ID Includes countersunk adaptor with bolts for extra clearance Fits Winona Van...

Goodson Flywheel Grinder Bolt Adaptor for DCM | FG-DCP-KIT Replace should bolts with standard hardware Size: 1/2" x 13 Fits DCM, Peterson & Kwik-Way machines Low cost adaptor converts any 1/2" or 7/16" bolt to a 3/4" ID Includes countersunk...

Goodson Flywheel Cutter Tip VN-FW 3-edge carbide cutting tip For use with special flywheel attachment on the Winona Van Norman 570 Rotary Broach .700" wide, .185" thick