Tools

Goodson 1.500" OD Valve Spring Seat Cutter VSS-1550 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.550" ID: 0.625"

Goodson 1.500" OD Valve Spring Seat Cutter VSS-1500 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.500" ID: 0.625"

Goodson 1.350" OD Valve Spring Seat Cutter VSS-1350 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.350" ID: 0.625"

Goodson 1.320" OD Valve Spring Seat Cutter VSS-1320  Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.320" ID: 0.630"

Goodson 1.625" Heavy Duty Valve Spring Adaptor  These heavy duty valve spring adaptors fit most common valve spring compressors Welded construction helps prevent jaw kick-off or twisting normally associated with spring compressor jaws Use with...

Goodson 1.000" - 1.875" Replacement Valve Spring Adaptor Jaws CF-44 Description: Large openings for easy access to keepers in heads with small recessed springs Fits frames with double locking screws to secure jaws such as Goodson CF-2002, CF-2004,...

Goodson Chamfering Cone 120-Grit CC-62 Description: Use these 1-1/2" diameter chamfering cones with the Goodson CC-60 mandrel (sold separately) Choose from 80 or 120 grit Aluminum-Oxide abrasive

Goodson Chamfering Cone 80-Grit CC-61 Description: Use these 1-1/2" diameter chamfering cones with the Goodson CC-60 mandrel (sold separately) Choose from 80 or 120 grit Aluminum-Oxide abrasive

Chamfering Mandrel 1-1/2" 60 Degree The mandrel is designed to support a 60º abrasive cone which is held securely by the retaining ring. One 80-grit cone is included with initial purchase. Description: 1/2" shank 1-1/2" diameter Ideal for...

Fragola Fire Sleeves Ultra Light-Weight Resin-coated fiberglass sleeve good for up to 1200 degrees. Available in black only. ***Select the number of feet that you need by the quantity. Ex. Quantity 10 = 10 continuous feet*** Size RangeBulk Part...

Holley LS7 Wet Sump Conversion Dipstick Drill Jig 302-31 When installing a LS7 with a dry sump system into your project, you will need to modify a few items on the engine before installation of the wet sump system. The Holley dipstick drill guide is a...

Mr. Gasket Engine Cleaning Brush Kit Deluxe 5189 Serious engine builders and backyard mechanics alike need these special length brushes to properly clean all the holes and passages found in most automotive engines. Available in a wide variety of...