Goodson Tools

Goodson Dowel Pin Puller Removal Basin GAO-21 Part of the Dowel Puller Set. Once you have removed the dowel pin from your work piece, place the complete assembly on the dowel removal basin and...

Goodson Dowel Pin Puller Tightening Sleeve GAO-3 Used as part of the Dowel Pin Puller to remove stubborn dowel pins from blocks, heads, flywheels and more. The tightening sleeve is used to lock...

Goodson 1.2" Long Heavy Metal Tungsten Heavy Metal, also known as Mallory Metal is essential when balancing rods and pistons to crankshafts to ensure proper engine operation. 1.2" Long. Press...

Goodson 1" Long Heavy Metal Tungsten Heavy Metal, also known as Mallory Metal is essential when balancing rods and pistons to crankshafts to ensure proper engine operation. 1.0" Long. Press...

Goodson Flywheel Table Lube 1 Gallon FG-1131-G Extend flywheel grinder life High pressure oil designed to lubricate table bearings and ways For all makes of flywheel grinders 1 Gallon (3.78 mL)...

Goodson Dial Indicator Spindle Extensions Goodson Dial Indicator Spindle Extensions are available in 3 lengths (1.5", 2.5" and 3.0") and feature 2x48TPI. Each sold separately.

Goodson Flywheel Depth Gauge FGG-12 Measure flywheel before and after grinding to maintain proper depth specifications Gauge assembly includes dial indicator, bar and magnets Spindle...

Goodson Flywheel Grinder Coolant 5 Gallon FG-1102-G For all makes of flywheel grinders Includes synthetic rust inhibitors to prevent rancidity Dilute 30:1 Available in 1 and 5 gallon...

Goodson Flywheel Grinder Coolant 1 Gallon FG-1101-G For all makes of flywheel grinders Includes synthetic rust inhibitors to prevent rancidity Dilute 30:1 Available in 1 and 5 gallon...

Goodson E-Z Lock Insert FG-LOCK OD: 5/8"x11, ID: 7/16"x14

Goodson Flywheel Grinder Bolt Adaptor Set | FG-AB-KIT Replace shoulder bolts with standard hardware Low cost adaptor converts any 1/2" or 7/16" bolt to 3/4" ID Includes countersunk adaptor...

Goodson Flywheel Grinder Bolt Adaptor for DCM | FG-DCP-KIT Replace should bolts with standard hardware Size: 1/2" x 13 Fits DCM, Peterson & Kwik-Way machines Low cost adaptor converts any...