Aeromotive
Aeromotive A1000 Brushless In-Line Fuel Pump 11124
- Part Number:
- 11124
- MPN:
- 11124
- Availability:
- Ships from Manufacturer ( 2-3 Week Lead Time )
- Shipping:
- Free over $98 in U.S. 48
- Type:
- In-Tank Fuel Pumps
- Inlet Fitting:
- ORB-10
- Outlet Fitting:
- ORB-10
- Race Fuel Compatible:
- Yes
- e85 Compatible:
- Yes
Description
Aeromotive A1000 Brushless In-Line Fuel Pump 11124
P/N 11124 A1000 Brushless External Fuel Pump
- Lighter than the traditional A1000 pump.
- Reduced current draw at higher, EFI pressures.
- Extended service life in methanol and ethanol.
- Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
- Quieter than the traditional A1000 pump.
- ORB-10 inlet and outlet ports.
- Requires straight 12-VDC to 16-VDC power supply.
- Aeromotive Brushless pumps are not designed for use with 16v charging systems, typically operating in the 16-18v range. If you are running a 16v charging system, the use of a voltage regulator or step down to typical 12v charging system voltages will be necessary.
- Not compatible with pulse modulated systems or fuel pump speed controllers.
- Includes 2 ea. P/N 12703 stainless steel t-bolt clamps for mounting.
EFI rated flow of 700 lbs./hr. @ 45 psi, 13.5 volts
Carb rated flow of 900 lbs./hr. @ 9 psi, 13.5 volts
Mounting: External
| CARB or EFI | Power Adder | Fuel | Min HP | Max HP |
|---|---|---|---|---|
| Carbureted | Yes - Forced Induction | E85 | 500 | 840 |
| Carbureted | Yes - Forced Induction | Gas | 700 | 1200 |
| Carbureted | No - Naturally Aspirated | E85 | 600 | 1050 |
| Carbureted | No - Naturally Aspirated | Gas | 800 | 1500 |
| Fuel Injected | Yes - Forced Induction | E85 | 400 | 700 |
| Fuel Injected | Yes - Forced Induction | Gas | 600 | 1000 |
| Fuel Injected | No - Naturally Aspirated | E85 | 500 | 910 |
| Fuel Injected | No - Naturally Aspirated | Gas | 720 | 1300 |
Specifications
| Series | A1000 |
|---|---|
| Maximum Flow Rating | 1000 |
| Maximum Pressure | 90 |
| Fuel Type | Gas/E85 |
| Universal Or Specific Fit | Universal |
| Internal Or External | External Or Internal |
| Pump Design | Rotary Vane |
| Motor Style | Brushless |
| Integrated Controller | No |
| Pulse Width Modulation Compatible | No |
| Fuel Delivery Type | Carburation & Fuel Injection |
| Inlet Type | Female Thread |
| Inlet Outside Diameter | ORB-10 |
| Outlet Type | Female Thread |
| Outlet Outside Diameter | ORB-10 |
| Maximum Current Draw | 12 @ 40 psi |
| Voltage | 12 |
| Negative Ground | Yes |
| Wire Quantity | 2 |
| Wiring Harness Included | No |
| Terminal Quantity | 0 |
| Terminal Type | Lead Wire |
| Strainer Included | No |
| Fuel Sending Unit Included | No |
| Regulator Included | No |
| Mounting Bracket Included | Yes |
| Mounting Hardware Included | No |
| Seal And Lock Ring Included | No |
| Gasket Or Seal Included | No |
| Grade Type | Performance |