BluePrint Engines Pro Series GM LS 427 C.I. 600HP Deluxe Dressed Crate Engine w/Black Pulley Kit/Holley Terminator X EFI System PSLS42751CTFKB

This engine build is a masterclass in modern muscle, pushing out a commanding 600 horsepower and 530 ft. lbs. of torque with a crisp 11:1 compression ratio. At its heart is BluePrint Engines’ high-strength cast iron LSX-style block, fortified with forged pistons and a forged crank for uncompromising durability and high-RPM stability. The LS3 aluminum heads and hydraulic roller cam work in harmony to maximize airflow and valve timing, delivering smooth, responsive power across the rev range. Fuel and air are fed through a sleek LS3 fabricated intake manifold and fuel rail system, with a drive-by-wire throttle body ensuring precise control. The Holley Terminator X Max system brings advanced engine management to the table, making tuning and diagnostics seamless. A black pulley kit adds both function and flair, featuring an LS2-style water pump, a high-output 140-amp alternator, a compact peanut-style A/C compressor, and a Type II power steering pump with remote reservoir. This setup isn’t just built to perform—it’s built to impress, whether you're carving corners or cruising the boulevard.

Description: 
Horsepower & Torque: 600 Horsepower / 530 ft. lbs. Torque
Compression Ratio: 11:1
BluePrint Engine LS3 Aluminum Heads
BluePrint Engine Hydraulic Roller Cam
BluePrint Engine Forged Crank
BluePrint Engine Forged Pistons
Block:
BluePrint Engines High Strength Cast Iron (LSX Style) Block
Increased Deck Thickness and Strength Webbing
Utilizes OEM LS3 Front and Rear Covers
Improved Water Jacket Design
Extended Cylinder Skirt
1-Piece Rear Main Seal
Priority Main Oiling
4.0685" Bore
6-Bolt Main
Rotating Assembly:
Forged Crankshaft
4.125" Stroke
Forged 6.125" Connecting Rods
Forged Pistons
Internally Balanced Front and Rear
Cylinder Heads:
BluePrint Aluminum Cylinder Heads - PS8015
69cc Chamber
2.165" Intake / 1.590" Exhaust Valves
259cc Intake / 102cc Exhaust Runners
Cam Specs:
Hydraulic Roller
.624 Intake / .624 Exhaust Lift
239 Intake / 255 Exhaust Duration
@.050-114 Degree Lobe Separate
Holley Terminator X Max Specific Features and Benefits:
Real Time Fuel Map Learning Simplifies Tuning by Dynamically Adjusting the Base Fuel Rate
On Board Bosch LSU 4.9 Wideband Control, Enabling Accurate AFR Readings and Closed Loop Tuning
Eight High Impedance Injector Drivers, Ideal for Stock LS Injectors and Holley EFI Injectors
Integrated 1-Bar MAP Sensor for Naturally Aspirated or Nitrous Setups, with Harness Support for External Higher Bar Sensors if needed
4 Configurable Inputs (12V, Ground, 5V, Frequency) and 2 Outputs (Ground, PWM) - Ideal for Electric Fans, Boost Control Solenoids, Nitrous Control and more
Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup
Integrated 3.5" Touchscreen Handheld with Setup Wizard, Internal Data Logging, and Real Time Gauge Displays
Terminator X Max ECU will Include a Base Timing Map Pre-Configured for this engine
Also Includes:
LS3 Fabricated Aluminum Intake Manifold - BPP822112
Drive by Wire Throttle Body - BPP12191019
LS Swap Oil Pan - BPP81074
Injectors and Fuel Rail Kit
Spark Plugs and Wires
Harmonic Balancer 
Throttle Pedal
Timing Cover
Valve Covers
Coil Packs
Black Pulley Kit
LS2 Style Water Pump
1- Wire 140amp Alternator
Peanut Style Air Conditioning Compressor
Type II Power Steering Pump with Remote Reservoir
Notes:
This Holley EFI Equipped engine has a fully calibrated ECU by BluePrint Engines. Please DO NOT follow the Holley EFI manual for the calibration of the ECU.
Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars.
Not for use in pollution-controlled vehicles or in dry sump applications.
The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.

BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. The warranty applies to individual or professional installations and is fully transferable.

Every BluePrint engine is Dyno tested and has strict parameters to pass and
be shipped to the customer. All parts are tested before being released for production:
• DC and Pneumatic assembly tools calibrated daily
• Fatigue Testing
• Durability Testing
• Random subassembly testing
• Quality system is ISO 9001: 2015 certified
• Traceable engine “DNA” electronic barcode record keeping of
manufacturing and performance data