null

EARL'S

Earls LS Oil Pressure Gauge Adapter Installation Kit LS0032ERL

PART NUMBER:
LS0032ERL
MPN:
LS0032ERL
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
Oil Pressure Gauge Adapters
Hose Length (in.):
36
Notes:
The M16 Adapter that screws into the top rear of the block is a straight thread metric design that is sealed using the included crush washer (do not use sealant or PFTE tape on these threads).
$51.70

Description

Earls LS Oil Pressure Gauge Adapter  Installation Kit LS0032ERL

This handy kit from Earl's includes all the parts needed to install a mechanical oil pressure gauge on the GM LS engine. This kit includes the special 16mm x 1.5 adapter fitting w/ crush washer (fits oil passage at the top rear of the LS engine block), pre-made -3 AN Speed-Seal® hose assembly, and two adapters for the gauge end of the hose. Choose the kit that fits your vehicle application w/ 36", 48", or 72" long hose. This kit is ideal for engine swaps & race cars that use a mechanical oil pressure gauge w/ the GM LS engine.

  • Kit Includes Adapters & Hose for Mechanical Oil Pressure Gauge Installation w/ GM LS Series Engines
  • Includes Most Common Adapters Needed For Installation of Gauge
  • Block Adapter: -3 AN to M16 x 1.5 Aluminum w/ Black Anodized Finish (AT9919AFJERL) w/ Crush Washer
  • Pre-Made Crimped Style Speed-Seal® Hose Assembly -3 AN Straight to 90 Degree Ends
  • Gauge Adapters: -3 AN to 1/8” NPT Female Straight & 90 Degree (968703ERL & 968603ERL) Steel w/ Nickel Plating
  • Ideal for Plumbing Mechanical Oil Pressure Gauge w/ 1/8" NPT Inlet Port
  • Fits GM LS Series Engines
View AllClose

Warranty Information

All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty. In the event of an alleged defect in material or workmanship, Holley Performance Products???????????????? responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Holley Performance Products. To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance Products. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements. HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND ??????????????? NEW PRODUCT Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose