null

Edelbrock

Edelbrock Pro-Flo XT LS2 EFI Intake Manifold

PART NUMBER:
7140
UPC:
85347071401
MPN:
7140
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
Cathedral Port Intake Manifolds
Cylinder Head Type:
Cathedral Port
RPM Range:
1500-7000
Throttle Body Inlet Bore:
90mm
Material:
Aluminum
Finish:
Natural
Intake Manifold Height:
Front=9.700" Rear=10.00"
Supplemental Bosses:
Yes
Supplemental Boss Quantity:
8
EGR:
No
Bolts Included:
Yes
Fuel Rails Included:
No
Throttle Body Included:
No
Notes:
Designed for LS2 with OE LS2 or equivalent throttle body.
  • Edelbrock Pro-Flo XT LS2 EFI Intake Manifold (7140)
  • Edelbrock Pro-Flo XT LS2 EFI Intake Manifold (7140)
$700.95

Description

Edelbrock Pro-Flo XT LS2 EFI Intake Manifold

The Pro-Flo XT LS2 EFI manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features a 90mm throttle bore opening and 2.75" port exit height. This manifold produced 30 more horsepower over a stock LS6 manifold at 6500 rpm

View AllClose

Warranty Information

GENERAL WARRANTY Edelbrock, LLC shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product sold. If you have any questions regarding a product or installation, please contact our Tech Department toll-free at 800-416-8628 from 7:00 a.m. to 4:45 p.m. PST, Monday through Friday. It is the constant endeavor of the Edelbrock, LLC to give our customers the highest quality products obtainable. Edelbrock warrants each new product, except Edelbrock Crate Engines, Performer Series Carburetors and Race Division Parts to be free from defects in both workmanship and material for a period of one (1) year from the date of purchase, provided that the product is properly installed, subjected to normal use and service and that the product is not modified or changed in any way, nor damaged because of negligence by customer or installer or used for racing or competition purposes. Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503. Customers who believe they have a defective product should either return it to the dealer from which it was purchased or ship it directly to Edelbrock, LLC along with proof of purchase and a complete description of the problem. The product must be returned freight prepaid. If a thorough inspection of the product by the factory indicates defects in workmanship or material, our sole obligation shall be to repair or replace the product. Warranty covers only the product itself and not the cost of installation or removal. PERFORMER / 94 SERIES® & RACE DIVISION WARRANTY Edelbrock, LLC warrants all Performer and 94 Series Carburetors and Race Division Products to be free from defects in material and workmanship. This warranty is extended to the original consumer/purchaser and has a duration of ninety (90) days from date of original purchase by such consumer, provided that the products are properly installed, subjected to normal use and service, is not modified or changed in any way. Remanufactured carburetor units are warranted for a period of thirty (30) days. This warranty is void if any Carburetor or Race Division Products are used for race or competition purposes. Any implied warranty determined to be applicable is limited in duration to the duration of this warranty. Edelbrock, LLC warranty will be voided if E85 fuel is used with any Carburetor. Some states do not allow limitation on how long an implied warranty is so the above limitation may not apply in your state. Should a part become defective, it should be returned to the original selling dealer or shipped freight prepaid to Edelbrock, LLC. It must be accompanied with the sales receipt and a clear description of the problem. Edelbrock, LLC reserves the right to replace or repair the defective part and return said part freight prepaid. This warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation. THUNDER SERIES AVS® CARBURETOR WARRANTY Edelbrock, LLC warrants all Thunder Series AVS Carburetor Products to be free from defects in material and workmanship. This warranty is extended to the original consumer/purchaser and has a duration of one (1) year from date of original purchase by such consumer, provided that the products are properly installed, subjected to normal use and service, is not modified or changed in any way. Remanufactured carburetor units are warranted for a period of thirty (30) days. This warranty is void if any Thunder Series AVS Carburetor Products are used for race or competition purposes. Any implied warranty determined to be applicable is limited in duration to the duration of this warranty. Edelbrock, LLC warranty will be voided if E85 fuel is used with any Carburetor. Some states do not allow limitation on how long an implied warranty is so the above limitation may not apply in your state. Should a part become defective, it should be returned to the original selling dealer or shipped freight prepaid to Edelbrock, LLC. It must be accompanied with the sales receipt and a clear description of the problem. Edelbrock, LLC reserves the right to replace or repair the defective part and return said part freight prepaid. This warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation. ENDURASHNE™ FINISH WARRANTY With proper care and cleaning, your EnduraShine parts will continue to look good and keep their high gloss shine for years. Never clean your EnduraShine parts with solvents or carburetor cleaners of any kind. Use of these cleaners will dull the luster and will remove the coating. Never use solvents or carburetor cleaners when rebuilding your EnduraShine carburetor. Do not use paper towels to wipe or clean your EnduraShine parts; always clean your EnduraShine parts using mild soap, water or non solvent cleaners such as Simple Green. Do not use a chrome polish or a scratch remover that is not clear coat safe. For best results, a high quality polish such as Novus No. 2 Fine Scratch Remover, Meguiars or Mothers Plastic Lens Cleaner should be used. Any cleaning product used on your EnduraShine parts MUST be clear coat safe or developed for the cleaning of acrylic coatings. We suggest applying any automotive wax coat after cleaning to help to seal the surface and protect the finish. Use of abrasive or solvent cleaners will void your manufacturer's warranty. E-FORCE SUPERCHARGER STANDARD WARRANTY It is the constant endeavor of the Edelbrock, LLC to give our customers the highest quality products obtainable. Edelbrock warrants each new supercharger kit to be free from defects in both workmanship and material for a period of three (3) years from the date of purchase, provided that the product is properly installed, subjected to normal use and service and that the product is not modified or changed in any way, nor damaged because of negligence by customer or installer or used for racing or competition purposes. Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503. Customers who believe they have a defective product should either return it to the dealer from which it was purchased or ship it directly to Edelbrock, LLC along with proof of purchase and a complete description of the problem. The product must be returned freight prepaid. If a thorough inspection of the product by the factory indicates defects in workmanship or material, our sole obligation shall be to repair or replace the product. Warranty covers only the product itself and not the cost of installation or removal. CONDITIONAL WARRANTY All Pro-Flo 2, Pro-Flo XT Fuel Injection Systems, Crate Engines, E-Force Supercharger Systems, Cylinder Heads and QwikData 2 Systems maintain a conditional warranty. These products must not be returned to the dealer; they should be sent to Edelbrock only. The product must be returned freight prepaid. If a thorough inspection of the product by the factory indicates defects in workmanship or material, our sole obligation on all products shall be to repair or replace the product. Warranty covers only the product itself and not the cost of installation or removal. IMPORTANT CYLINDER HEAD INFORMATION: When using other camshafts with Edelbrock heads, please consult the camshaft manufacturer for recommended valve spring rates and specifications. Valve spring rates and camshafts must be compatible to avoid severe engine damage. All Edelbrock complete heads are supplied with valve springs that are compatible with Edelbrock camshafts for optimal operations within the specified RPM range. Camshafts that exceed the specified valve spring rate will void the warranty on these heads. OFF-HIGHWAY USE Many of the parts described or listed herein are designed for off-highway use only. Installation of "off-highway" parts may impair your vehicle's emission control system performance, these parts should not be installed on any vehicle used on any street or highway. Any installation as such could adversely affect the warranty coverage for an on-street or highway vehicle and violates state or federal emission laws.
View AllClose