null

HOLLEY

Holley 36 lb/hr EV1 High Impedance Fuel Injectors 522-368

PART NUMBER:
522-368
UPC:
90127666630
MPN:
522-368
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
36 lb/hr Fuel Injectors
Style:
EV1
Injector Type:
High Impedance
Rated Injector Flow at 43 PSI:
36
Maximum Rated Horsepower:
575
  • Holley 36 lb/hr EV1 Low Impedance Fuel Injectors 522-368
  • Holley 36 lb/hr EV1 Low Impedance Fuel Injectors 522-368
$522.95

Description

Holley 36 lb/hr EV1 High Impedance Fuel Injectors 522-368

Holley EFI Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. They are available from 19 to 160 lb/hr flow rates to accommodate a variety of vehicles from mild street cars to high horsepower race applications. Holley EFI Fuel Injectors provide precision fuel delivery you can depend on.

Features:

  • Bosch/EV1 style performance injectors - Set of 8
  • High impedance (12.2 Ohms) for use with saturated drivers
  • Rated injector flow: 36 lb/hr @ 43 PSI
  • Supports up to 575 horsepower
  • Tri-cone spray pattern
View AllClose

Warranty Information

All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty. In the event of an alleged defect in material or workmanship, Holley Performance Products’ responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Holley Performance Products. To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance Products. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements. HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND – NEW PRODUCT Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose