null

HOLLEY

Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149

PART NUMBER:
12-149
UPC:
90127029688
MPN:
12-149
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
In-Tank Fuel Pumps
Free Flow Rate:
1268
Maximum Pressure (psi):
130
Inlet/Outlet Qty:
1/1
Inlet:
8 AN
Outlet:
10 AN
Notes:
These pumps do not have an internal bypass. Not designed to use a standard conical seat style union in the inlet or outlet of this pump. A bypass style regulator and return line are required.
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
  • Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149
$2,499.95

Description

Holley EFI In-Tank Dual Fuel Module 1268 LPH VR Series Brushless 12-149

*Street/Strip Carb or EFI Applications Supports up to 4400 EFI or 4800 Carb HP Compatible with Pump Gas, Race Gas, Methanol and E85*

Holley Fuel Cell EFI Pump Modules with dual VR Series Brushless Fuel Pumps. These drop in modules come with two controllers and harnesses to give you VR fuel pump power inside your fuel cell. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5" to 11" deep. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.
***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.
Designed to work on high boosted race cars as well as your daily driven weekend endurance car, these pumps work with gasoline, methanol, and E-85* (Compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event) and can maintain pressures of 130 PSI and up to 335 GPH flow**. Fueled by TI Automotive.
The pumps include a 2 step controller for pump speed control. The pumps can be ran in one of two different speeds. A low speed control for low fuel consumption requirements or at full speed for high fuel consumption requirements. The VR2 includes (2) controllers for precise control of both pumps independently of each other. Both the VR1 and VR2 pumps are proven for 18.5V compatibility.
**At 13.8V *
Overall pump dimensions: 9.5" Long; 4.75" Wide; 2.75" Tall

Features:

  • Capable of 130 PSI while providing significant flow for forced induction applications where belt driven pumps are normally used.
  • Unlike other pumps, the VR Series are built for continuous duty if needed.
  • Billet aluminum construction for durability and good looks
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • High flow and high pressure with low amperage draw
  • Can be fully submerged in the fuel cell or chassis mounted
  • Maximum amp draw of 38 AMPS for the VR2
  • Modules include dual VR Series Brushless fuel pumps with two step controllers and harnesses.
View AllClose

Warranty Information

All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty. In the event of an alleged defect in material or workmanship, Holley Performance Products responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Holley Performance Products. To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance Products. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements. HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND NEW PRODUCT Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose