HOLLEY
Holley Hi-Ram Gen V LT1 105mm EFI Intake Manifold 300-142
- PART NUMBER:
- 300-142
- MPN:
- 300-142
- Availability:
- Ships from Manufacturer
- Shipping:
- Free over $98 in U.S. 48
- Type:
- Gen V LT Intake Manifolds
- Throttle Body Inlet Bore:
- 105mm
- RPM Range:
- 3500-8000+
- Material:
- Cast Aluminum
- EGR:
- No
- Throttle Body Included:
- No
- Finish:
- Natural
- Height (in.):
- 9.44
Description
Holley Hi-Ram Gen V LT1 105mm EFI Intake Manifold 300-142
The new Holley EFI Hi-Ram intake provides the ultimate performance with the new GM direct injected Gen V 6.2L LT1 engine. The modular design of this manifold allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper & cross-sectional area to perform in a wide variety of engine configurations. The optional injector bosses on the intake runners allow increased performance potential by using additional injectors along with the factory direct injection. When you look for the pinnacle of performance, price, and quality, look to Holley EFI.
Features:
- Modular Design w/ Removable Top
- Overall Height: 13.34” (w/ EFI Top - 95mm or 105mm) – See Drawing
- A-B Height: 12.10” (w/ Carb Style Top - 2 x 4150 or 2 x 4500) – See Drawing
- Height at Plenum Flange: 9.44”
- Port Size: 2.06” High x 1.53” Wide
- Runner Length: Approx. 6.5”
- Large Plenum Volume of 549 Cubic Inches (w/ 1 x 95mm or 1 x 105mm Throttle Body Top)
- Available With or Without Injector Ports in the Runners
- Intakes w/ Injector Ports Include Fuel Rails w/ Dual Mounting (1.48” or 2.56” O-ring to O-ring injector length)
- Fuel Rails are Anodized, Laser Etched, and Machined for 8AN O-Ring Fittings at Each End
- Rear of Plenum Machined for MAP & 3 Vacuum Ports
- Head Flange has Clearance for Fuel Supply to High Pressure Pump
- Increased Runner Wall Thickness for Custom Porting at the Plenum to Runner Entry on Each Runner
- O-Ring Seals at Cylinder Heads & Plenum Top
- Easy Assembly w/ Top Mounted Screws on Plenum Top (all except front 2 screws)
- Several Top Options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or Blank Flange for Custom Throttle Bodies
- 3500-8000+ RPM Power Band
Videos
View AllClose
Warranty Information
All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty.
In the event of an alleged defect in material or workmanship, Holley Performance Products’ responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential
or other damages incurred by use of any product of Holley Performance Products.
To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance
Products.
This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.
HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND – NEW PRODUCT
Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase.
Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant,
and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose
Related Products
Related Products
Holley Hi-Ram Gen V LT1 92mm EFI Intake Manifold 300-143
HOLLEY
$941.95
Holley Hi-Ram Gen V LT1 92mm EFI Intake Manifold 300-143 The new Holley EFI Hi-Ram intake provides the ultimate performance with the new GM direct injected Gen V 6.2L LT1 engine. The modular design...
300-143
Holley Hi-Ram LS3 105mm EFI Intake Manifold 300-117BK
HOLLEY
$1,169.95
Holley Hi-Ram LS3 105mm EFI Intake Manifold 300-117 The Holley GM LS3 Modular Hi–Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet–metal for high–performance...
300-117BK
Holley Hi-Ram LS1 105mm EFI Intake Manifold 300-123
HOLLEY
$1,097.95
Holley Hi-Ram LS1 105mm EFI Intake Manifold 300-123 The Holley GM LS1/LS2/LS6 Modular Hi–Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet–metal for...
300-123
Holley Hi-Ram LS7 105mm EFI Intake Manifold 300-125BK
HOLLEY
$1,138.95
Holley Hi-Ram LS7 105mm EFI Intake Manifold 300-125BK The Holley GM LS7 Modular Hi–Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet–metal for high–performance...
300-125BK
Holley Hi-Ram LS3 105mm EFI Intake Manifold 300-117
HOLLEY
$1,097.95
Holley Hi-Ram LS3 105mm EFI Intake Manifold 300-117 The Holley GM LS3 Modular Hi–Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet–metal for high–performance...
300-117