null

HOLLEY

Holley LS Gen III/IV Power Steering Hardline for Type II Pump / LSA Drive 198-207

PART NUMBER:
198-207
UPC:
090127105641
MPN:
198-207
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
Power Steering Accessories
Hose Material:
Steel
Hose Finish:
Zinc Plating
Hose Fitting Size:
-6 AN
$77.57

Description

Holley LS Gen III/IV Power Steering Hardline for Type II Pump / LSA Drive 198-207

Power Steering Hardline for Type II power steering pumps. Steel w/ Zinc Plating For use with LSA accessory drives
 
The pressure hose connection on the Type II power steering pump is really close to the pulley and this can make it difficult to attach the hose since there isn't much clearance. This special P/S hardline moves the connection behind and below the pump for clearance and improved appearance. The special banjo bolt & crush washers provide additional clearance. Includes mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. Works with most Type II power steering pumps. For use with LSA accessory drives

Features:

  • Moves Inlet Connection to More Accessible location
  • Better Appearance
  • Steel w/ Zinc Plating
  • Mounting Bracket – Better Support & Strength
  • Special Banjo Bolt & Crush Washers Included
  • Works with Most Saginaw Type II Power Steering Pumps
Accessory Drive Style Mid-Mount
Adapter AN Size ( A ) 6 AN MALE
Adapter Type Power Steering
Brand Holley
Emission Code 5
Engine GM Gen III/IV (LS Based)
Finish Zinc Plated
Hose Size 6 AN
Material Steel
Product Type Adapter/Extension
Warranty Limited 90 Day
UPC 090127105641
Part Number 198-207
View AllClose

Warranty Information

All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty. In the event of an alleged defect in material or workmanship, Holley Performance Products’ responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Holley Performance Products. To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance Products. This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements. HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND – NEW PRODUCT Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose