null

Radium Engineering

Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL

PART NUMBER:
20-0564-FL
MPN:
20-0564-FL
Availability:
Ships from Manufacturer
Shipping:
Free over $98 in U.S. 48
Type:
Catch Can Kit
Catch Can Capacity:
7 Ounces
Fitting Side 1:
10AN
Fitting Side 2:
4AN
Fitting Material:
Aluminum
Hose Material:
Rubber
  • Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL
  • Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL
  • Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL
  • Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL
  • The CCV catch can mounts to 3 OEM threaded bosses at the rear of the supercharger housing
  • To retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) ports and the intake pipe.
  • The Radium Engineering PCV catch can kit improves the performance of the LSA crankcase ventilation system. The catch can runs inline between the PCV valve and the intake manifold. The included bracket (below) replaces the OEM intercooler coolant filler bracket and mounts the catch can.
  • Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL
$503.45

Description

Radium Engineering 2009-15 Cadillac CTS-V Dual Catch Can Kit Fluid Lock 20-0564-FL

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modifications are required.

INCLUDES
-Baffled oil catch can
-LSA specific mounting bracket
-AN adapter fittings and hose ends
-Stainless steel hardware
-Radium PCV hose

When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. 

At low loads, this catch can experiences atmospheric pressure. However, when the engine is at high load (WOT), these vents will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.

View AllClose

Warranty Information

All Radium Engineering brand products are subject to a 1 Year Limited Warranty from the date of original purchase. If a product fails, it will be repaired or replaced at Radium Engineering’s option when it has been determined by Radium Engineering to have failed due to defects in materials or workmanship. Warranty claims must be made by the original purchaser. If the purchase was made from a retailer other than radiumauto.com, please contact the place of purchase for further assistance. This warranty is limited to repair or replacement of the merchandise only and shall not, in no event, exceed the original purchase price. Radium Engineering will not be held responsible for secondary or consequential damages or costs (including labor time, towing, etc.) incurred due to failure of the product. Standard ground shipping is used for all warranty transactions. Expedited shipping is available, but the cost difference must be paid by the end user in advance of the shipment. Warranty claims must ship pre-paid to Radium Engineering for review. Claims must include the failed part(s), RMA number, and original proof of purchase. If the claim is missing any of these items, it may be rejected and returned to sender. Product must be received by Radium Engineering within 14 days of RMA’s issue date. Please note that before Radium Engineering can issue an RMA for any product, it is first necessary for the installer or end user to contact info@radiumauto.com to discuss the problem. Most issues can be resolved via email. Under no circumstances should a product be returned or a RMA requested before the above process transpires. This warranty applies to the original purchaser only and is non-transferrable. Improper use, installation, modification, abuse, or unauthorized repairs or alterations voids this warranty. Credit for defective products will be issued pending inspection by Radium Engineering. This warranty does not extend to third party products often used in Radium Engineering products, such as fuel pumps, turbochargers, or any other non-Radium Engineering brand products.
View AllClose

Related Products

Related Products

Radium Engineering Petcock Drain Kit 20-0024
Add to Cart

Radium Engineering Petcock Drain Kit 20-0024

Radium Engineering

$39.45
Radium Engineering Petcock Drain Kit 20-0024 20-0024 PETCOCK DRAIN KIT-4AN ORB to barb fitting-Nylon 1/4" barb ball valve-Radium PCV Hose This kit can be used to remotely drain the catch cans
20-0024